Eversolo AMP-F10 effektforsterker

Fullbalansert Klasse A/B forsterker. Kan brukes som Stereo eller Mono forsterker. 2 x 200 watt i 8 ohm, 2 x 320 watt i 4 ohm. 1 x 650 watt i mono 8 ohm. 1 x 950 watt i mono 4 ohm. Den driver det meste. Ta kontakt for mere info. 29990 kr

PrisNOK29 990,00 inkl. mva.
Ønskeliste
  • Produktinfo
  • Produktanmeldelser (0)

AMP-F10

Spesifikasjoner

2 x 200 watt i 8 ohm, 2 x 320 watt i 4 ohm

1 x 650 watt i 8 ohm mono, 1 x 950 watt i 4 ohm mono

 

Eversolo AMP-F10Class AB Power Amplifier Dual Mono Balanced 2x320W 4Ω / 1x950W 4Ω

EVERSOLO AMP-F10 picture

Eversolo has designed the AMP-F10 class AB power amplifier to accompany its new streamer, the DMP-A10. This amplifier features a dual mono balanced architecture with no less than 5 MOSFET transistors per channel. This architecture gives it a substantial power reserve, as it is capable of developing up to 2x320W under 4 ohm and 2x200W under 8 ohm. Added to this is the possibility of bridging it in mono mode and achieving an output power of 950W at 4 ohms and 650W at 8 ohms. The AMP-F10 can therefore easily drive demanding loudspeakers with hard-to-move drivers.

In addition to this exceptional power, Eversolo has ensured ultra-clean sound reproduction with a THD level of just 0.008%, an SNR of 113dB for fine, detailed reproduction, and an extended frequency response of 10Hz-30Khz (8Ω).

In terms of connectivity, the AMP-F10 aims for simplicity and efficiency: a signle-ended RCA input and a balanced XLR input with output on speaker terminals. What's more, the AMP-F10's design matches the elegance of the DMP-A10, featuring two backlit vumeters on the front panel for a touch that's both classic and modern.

Eversolo AMP-F10: high-fidelity amplifier

The AMP-F10 uses dual differential amplifiers within a balanced circuit to handle low-level signals, limit distortion and extend its dynamic range. As a result, the AMP-F10 guarantees a faithful and coherent listening experience, whatever the volume level.

Le circuit d'amplification du AMP-F10
Des basses propres et intenses

Eversolo AMP-F10 : Power Bass

Capable of reproducing deep, punchy bass while retaining exemplary clarity and detail, the AMP-F10 adapts easily to different musical styles, delivering a reliable and emotionally engaging sound experience.

Eversolo AMP-F10: 5 MOSFET transistors per channel

Each channel of the amplifier is equipped with five carefully matched MOSFET transistors. These components ensure an ideal combination of power and stability, contributing to distortion-free sound reproduction.

Les transistors Mosfet du EVERSOLO AMP-F10

Eversolo AMP-F10: a filtered power supply

The components of this power amplifier have been chosen with meticulous care. Eversolo has left nothing to chance, including a linear power supply capable of delivering 1000W per channel thanks to its large toroidal transformer. This configuration avoids any interference between the two channels and delivers a clean current. What's more, this generous power output delivers impressive, immersive sound dynamics.

To protect the audio circuitry, a DC filter is placed between the main AC supply and the internal circuitry. This system effectively eliminates low-frequency DC interference, ensuring exceptionally pure power.

L'alimentation du EVERSOLO AMP-F10

AMP-F10 overview

Aperçu du EVERSOLO AMP-F10
1 Balanced XLR input
2 Single-ended RCA input
3 Sensitivity switch : 29dB/23dB
4 Operating mode switch: Bridge mono / Stereo
5 Standby mode: Trigger / Signal
6 Trigger in / out
7 Right channel output on speaker terminal
8 Left channel output on speaker terminal
9 Power supply input / Fuse / Power switch
10 Current selection switch 100-120 AC/220-240V AC

Technical characteristics

Specifications
Product type Power amplifier
Class AB
Transistors 5x MOSFET transistors (left channel)
5x MOSFET transistors (right channel)
Inputs 1x Single-ended RCA stereo input
1x Balanced XLR stereo input
Output Speaker terminal output
Other connectors Trigger in / out
Input sensitivity adjustment 23dB/29dB
Output power 2x 320W @ 4 ohm
2x 200W @ 8 ohm
2x 450W @ 2 ohm

1x 950W @ 4 ohm
1x 650W @ 8 ohm
THD+N 0.008%
SNR 200W @ 8Ω/1kHz
Gain 23dB : ≥ 113dB @A-wt
Gain 29dB : ≥ 110dB @A-wt
Frequency response 10Hz-30kHz @ 8 ohm (±0.5dB)
Crosstalk 200W @ 8ohm/1kHz ≤ -95dB
Input impedance RCA : 10KΩ
XLR : 10KΩ
Input sensitivity (200W @ 8ohm/1kHz) RCA input gain 23dB: 2.65V
RCA input gain 29dB: 1.3V
XLR 23dB input gain: 5.2V
XLR 29dB input gain: 2.4V
Damping factor >600 @ 8ohm/1kHz
General
Power supply 100-120V AC / 220-240V AC 50/60Hz (selector switch available on bottom of unit)
Net weight 18Kg
Gross weight 21.5Kg
Color Black
Dimensions 430 x 310 x 147mm
Package 1x Power amplifier AMP-F10
1x Trigger cable
1x Mains cable

 

Skriv en produktanmeldelse og del dine erfaringer med dette produktet med andre kunder.