One of the most important aspects of cartridge design is the diamond tip of the stylus. It is this specially cut jewel which has to retrieve information often represented by variations in a record groove that often measure millionths of an inch. If the profile of this diamond is cut to the wrong shape it will damage records and reduce the amount of retrievable information. The moving coil Shiraz cartridge has a stylus which Roksan Audio firmly believe is the world´s best diamond profile design.
The Swiss made Gyger II has a super fine line profile, offering excellent tracking ability with stunning detail retrieval and low surface noise. The body is made from a solid aluminium alloy and fitted with a robust, broadcast-standard generator uniquely fixed to the body with three spikes, giving it precise alignment and coupling without using distortion-inducing adhesives. Excessive cantilever movements at certain frequencies are damped by the capacitors mounted directly to the generator over the coil, where they accurately preserve the minute signal. The Shiraz produces relatively high output for a moving coil design, which is important for a good signal to noise ratio and channel separation, but requires careful matching to your pre-amplifier phono stage.
Once the Shiraz is set up correctly, the sonic performance cannot be easily matched by any other cartridge.
- Premium moving coil cartridge
- Phenomenal Gyger II diamond stylus profile
- Thoughtful cartridge manufacturing process, geared towards achieving the most natural performance possible
||0.21 mV/cm/sec (RMS)
1.05 mV @ 5cm/sec Recorded Velocity
||Super Fineline - Gyger II
||2.2 - 2.5g
||5 Axis Machined Solid Aluminium Alloy
||Unique 3- Point Rigid Fixing,
Spiked To Body (Without Adhesive)
||Standard 0.5 Inch Centres (12.7mm)
||30 - 100Ω
||15Hz - 30kHz
|F I M:
||< 0.5%, 19μ